Adjusting your Earth Watch Band

We always suggest taking your Earth Watch to a local watch or jewelry store to have the band adjusted.
These shops have the tools required to make adjustments without damaging your watch.

This Earth Watch has double-headed screws that hold 4 of the links in place.
2 small flathead screwdrivers will be required to undo these screws correctly.

  1. While holding one screw-head in place with a screwdriver, begin to turn the other screw-head in a counter-clockwise direction.
  2. Once the screw-head is all the way unscrewed, remove it and set it aside.
  3. The remaining pin needs to be removed from the opposite side of the band.
  4. Once this pin has been removed, the link will be free from the band.

The end links on this Earth Watch have pins that hold them in place.
A small tool with the correct diameter will be required to remove this pin.

  1. Position your watch with the end link closest to you, watch facing up.
  2. Use your selected tool to press from the right side.
  3. The pin will be removed from the hole on the left side of the band.
  4. Once this pin has been removed, the link will be free from the band.
  5. The pin for the end link can we used to reattach it.
  6. Insert the pin from the left side of the band and press until firmly in place.

Using this method, you will be able to remove a total of 4 links from your Earth Watch.